Bath Fan Vent
The Lambro 3-inch or 4-inch black ABS plastic exhaust vent with snap-in collars is ideal for venting through the roof. It features a damper and screen that prevents outside elements and air from entering the vent. The damper seals the vent opening when the bath fan is not running because no exhaust air exits the vent. When the bath fan operates, the exhaust air pressure pushes the damper to let the exhaust air escape from the vent.
WARNING:The roof vent applications consist only of shingled roof installations.
The exhaust vent is for new and replacement installations. The vent frame comes with six predrilled nail holes to secure the vent to the roof.
The vent’s manufacturing material is ABS (Acrylonitrile Butadiene Styrene) with a UV additive to prevent premature fading caused by sunlight. It would be best to prep the vent before painting it; we recommend plastic paint to paint the plastic vent effectively.
Make sure to check local building codes before installation.
Product features and benefits:
Bulk pack
Roof Cap is for Shingle Roof Installations Only
1.375″ length 3-inch or 4-inch snap-in collars for easier installation of the duct
Opening and closing damper prevents outside elements from entering the vent
Screen prevents birds from nesting inside of vent
Designed to prevent leaks with proper installation
Mounts over existing 4 inch openings
Made of ABS (Acrylonitrile Butadiene Styrene) material
Predrilled nail installation holes
UV inhibitor is used to help prevent the premature fading of vent
Plastic vent is paintable when prepped before painting – plastic paint recommended
Can not be used in clothes dryer applications
Installation nails or screws (not included)
